I am looking to buy a 3D printer for my son (and for myself too). We want to print, not tinker, so it should be something that gives great results right from the start.

Can you guide me to a sensible choice?

My first choice would have to be the Prusa MK3S Plus but it is outside the price range I am shopping for, except if I buy used – would that be bad to do?

Realistic choices:

  • €380 used Prusa MK3S+, with 10 days printing time
  • €400 new Prusa Mini+
  • €250 new Ender 3 V2 Neo

Criteria:

  • High quality, no hassle. I want to print, not tinker.
  • Preferably (semi)assembled.
  • Auto bed leveling.
  • Auto error detection (filament, power, etc.?).
  • Budget up to 600 EUR/USD including extras, excluding filament.
  • Speed is not important.
  • Size is not important.
  • Must not be cloud-based.

Questions:

  • Surface?! Smooth, os satin, or textured? (Why) Should I have more than one kind?
  • (Why) Do I need an enclosure?
  • rambos@lemm.ee
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Im not afraid of fire (that much), but check out Ikea Lack enclosures. You can build one for quite cheap and you will have much better experience. Its still cheap crap, but you will enjoy printing much more. While cardboard can do its job, I wouldnt recommend it to someone new in printing. You want to see your first layers to make sure its printing fine etc. QOL upgrades are prio #1, at least for me

    • FuglyDuck@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      1 year ago

      I agree. The point of mentioning it is how simple enclosures can be. The creality enclosure is literally just a pop-up hamper with metalized nylon.

      You don’t need to go hog wild with it or In any case…my FDM printer probably doesn’t fit a lack. It already barely fits on my workbench desk.

      Though if you have something like a voron, where there’s vslot frame all the way around it… some thin plexiglass can just slide into the vslot. If you want a very tight seal, silicone caulk inside first. The front face uses ball bearings imbedded around a u-track edging that snap to small magnets imbeddd into some vslot slot covers (all printed.)

    • Project_Straylight@lemmy.villa-straylight.social
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I’m still considering an enclosure but besides the novelty I don’t believe a Lack is really a cheap option. A tent will cost €50 while the Lack will cost €26 for the tables, €5 for the screws, and then €150 for the sides and door :-)

      • rambos@lemm.ee
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Its not the cheapest, but your math is boosted a bit. 4 years ago, I bought 3 ikea lack tables for 30€ in total and sides were <100€. I know everything is more expensive today, but I built enclosure with storage. You can also use cheaper sides (I got 18 mm wood for furniture) and you can make enclosure with only one lack table if printer sits on something already, it shouldnt be more than 100€. Tent should be cheaper than cabinet anyway, but anything is better than cardboard box