First, start big. Get the basic shapes right with large lettering. Ideally you would have something you are comparing to like a stencil or grey printout so you can see the difference between your writing and the target.

After you have the shape fairly good large you can shrink it down. You can take your time getting to that and just make a little progress at a time.

If you find it impossible to shed your current handwriting consider using grid paper to force spacing and maybe try your non-dominant hand.

Revengers, resemble!

Today is a good day to be Deleted

I have tried both and a bunch of others with a laptop with nVidia and Intel and have had a range of experiences.

Anything Ubuntu based worked out of the box but any significant deviation from the exact current standard made things less stable. Changing WM/DE was not really possible and troubleshooting was opaque. Snap was also a nightmare of broken packages and bad update processes.

Manjaro looked really nice and had that lovely Arch flavour, but it is not really Arch, more Arch adjacent. Lots of things work similarly but lots of things break in bad ways. They have had numerous issues with security, bad updates, and general poor practice.

Pop is cool, I like it, but just not a good fit for me. Cosmic is a great environment but I like to tinker too much and while the team is great and do good work it is just not the same kind of defaults I like.

EndeavourOS is my current pick. It is Arch with sane defaults. It comes prebuilt with a DE configured, backups using BTRFS snapshots, a handy updater and package management config, some cool apps built in, and it is very performant. The guides for hardware video acceleration worked first time for me which has never happened before, normally that is a major pain and takes a few days to get sorted on a fresh install. Graphics performance is awesome, same with built in OOM protection. That said, make sure you have enough RAM. I had 8gb in my laptop and ended upgrading to 32gb after a number of failed builds and messing around with swap to get things to finish. If you have less than 16gb RAM I would recommend upgrading.

Whatever you choose, I would recommend trying a few things before settling down. The right fit is right for today and may change, so try things again in the future if you feel uncomfortable. Also do what works for you, not for anyone else. If you don’t like Arch you are not obligated to use it, same with Ubuntu, Debian, Fedora, etc. Keep the fun of it and play around, maybe just boot up a few live environments and see if something tickles you. I hear good things about Hannah Montana Linux.

Indeed, it was a really clear case of election interference through the falsification of business records. It is a good result and now we just have to wait and see how people react. Will he beat Biden in the election? Will he be clearly rejected? I hope things end with him not being in office, but no matter what happens he cannot pardon himself for state crimes and if he wins the election and New York sentences him to prison time then there will be a novel set of issues to resolve from there. Ideally he loses, is sentenced to prison, and spends the remainder of his life offline.

To be fair, it would only have taken one jury to hang it and worrying about that makes sense. Happily thus has worked out in favour of justice, but it was not a given and people were right to fear that outcome. Hopefully we will see the predicted change in likely voting outcomes from unaffiliated voters and thus can be the end of MAGA over the next couple of election cycles.

My understanding is you make fewer but more replicable mistakes. If you use a wire you have to trace it, keep the length consistent for timing reasons, use very consistent soldering technique, and ultimately you have a hard time tracing issues. With a homemade PCB you generally do get what you ask for in terms of circuitry. Traces are the right length, right thickness, right spacing, and if not then the whole board is similarly impacted, so it is obviously broken or not broken. If you mess up your design then you have a problem, but if you did the process right and you have a valid design then it works.

That all said, homemade PCB is a large time sink and modern PCB manufacture is so cheap and fast it doesn’t make sense to do at home for the most part. You can literally get a complex board faster by ordering it from halfway around the world and having it posted than making it yourself. I would say it is a good learning exercise, not a good manufacturing or prototyping practice.

The payment of hush money would have counted as a campaign contribution regardless of the source. If he paid it personally it would have been reportable. If Cohen paid it it would have been reportable. If a third party paid it it would have been reportable.

The reason it would have been reportable is because it provided benefit to the campaign. Covering up negative news is a benefit to the campaign, so if he paid it himself it would still have been a campaign contribution he would have to report.

By covering up the payment he is taking or making a campaign contribution in violation of FEC rules. By suppressing the story of his affair with Stormy Daniels he is contributing to his campaign and failure to disclose makes this a crime.

The fact that he committed a crime by failing to report a campaign contribution is what makes the payment itself part of a felony rather than a misdemeanor. In New York law they do not have to prove the specific electoral crime itself for this set of falsifications of business records to be related to a felony level crime and therefore felonious. The jury instructions approved by the judge specifically say that the jurors can find that he violated one of several options of law for raising this to a felony.

To be clear, it is not a hush money trial. It is an election interference trial. Hush money is not actually criminal in and if itself, the fact that it was used in relation to influencing an election is what makes it a crime. It is election interference.

Don’t forget Alpha Phoenix, he does similarly crazy fun science stuff and has a lot of fun doing it.

Also Integza, Explosions&Fire, Extractions&Ire, NurdRage, and so on.

I agree with many of these points, but have two thoughts here. First, the same was true of many items being produced in China in the past, but quality control got better and honestly most of the products you can buy for a reasonable price are partly or wholly made in China. Second, Tesla is a good example of a US based company with many of the same issues. Loose panels, door handles that fall off, accelerators that get stuck, and so on. Bad engineering is not only available in Mandarin.

I hope they can produce a good quality electric car and help accelerate the transition.

So I may not be representative of your use case, but I got the steel cap boots for work. I have had bunions before which are caused by pressing in on the side of the big toe, forcing the joint at the side of the ball of the foot to get messed up. When I switched it was a little painful as the toe straightened over time, but it was already sore using other barefoot shoes (Joto soft shoes), so I don’t think it was the shoes making the pain.

As for weight, for steel caps absolutely not. The rubber on the bottom is less dense and heavy than other boots so they move more freely and weight less. They are also quite soft for all the top parts so it really is up to you how you tie them and how that applies pressure to your foot. Make them tight and it will feel tight, rerun the laces and you can change where it is tight. I tried using elasticated lace replacements for a while on the lower two pairs of holes and it was good, I ended up using the laces to make it more stable but for normal day comfort I would recommend using elastic lace replacements, much less pressure and no tying of laces.

Start with a look at Birkenstocks. Wide toe super flat shoes with a range of styles. I use their boots and they are good enough for most environments.

Yeah, meds are not the solution to all problems. Some meds can at some times be useful for some people, but it is not appropriate to just blanket the population with benzodiazapines and consider the population to be mentally healthier. All sort of other stuff like improving social connection, reducing working hours, building skills, and so on can do a lot more to reduce anxiety and depression, but where is the funding for a local community garden or woodworking class?

Australian healthcare is actually pretty amazing. I had endocarditis last year and had two collapsed lungs with my blood oxygen plummeting and no clear reason for the infection. The bacteria ate one of my heart valves so my heart had to do 4 pumps to have the effect of one, pushing my heart rate up to around 140 bpm while sleeping. I was flown from my regional town to the best hospital for the job and had an emergency valve replacement. I was up and walking 2 days later and I was flown home a couple of weeks later. I now take Warfarin and will for the rest of my life, along with a beta blocker. My biggest healthcare costs involved with this whole thing is my monthly medication cost of about $30 from 5 prescriptions including ADHD medications.

That all said, mental health care is not as good here as it used to be nor as it should be. We had a conservative government for 12 years and they absolutely gutted the mental health care system. They cut funding for extremely effective programs and did some real harm to vulnerable people (if interested look up robodebt). So yes, mental health is not great here. It is way better than in the US or in the UK but it is not in line with best practice research.

The fact that we can do better does not eliminate how we we do. I didn’t die from something that should have killed me, and this is the second time I have had a really major injury that required surgeries and so on. Well, third technically. Still, I have never paid a cent at the time of use for any medical care and I have paid for the medical care of others with my taxes. Am I coming out ahead of my costs? I hope not to be honest. I hope I have contributed more than I have cost the system because I care what happens to other people. I hope I have paid my way but I will be sure to honestly file my taxes every year knowing the system I am paying in to is the same one that has saved my life. Again. Man I am stupid.

Man, it looks like AI art the spelling is so bad. Impressive.

Something worth noting is that this is yet another example of how the patriarchy hurts people. She felt that her image on Instagram was so important that she took risks which ultimately lead to her death. She doesn’t have to be an idiot to have this happen, I’ve done tonnes of stupid dangerous stuff in my life and I’m fairly sure everyone else here can think of a few things that could have gone wrong.

The algorithm of something like Instagram is built around enhancing use of the platform. This is the same fundamental motivation as tobacco companies or gambling companies. Your continued use of the product is essential, even if it is harmful to your health. So they design their product to enhance it’s addictiveness and market to people who are vulnerable, say younger women for example, and boom, revenue.

Meta has a meaningful hand in this type of situation. The same goes for all the other attention economy companies. Their product doesn’t have to be harmful but it is way more profitable if harm is not a consideration.

Have a look at this link

https://linuxways.net/mint/setup-wine-linux-mint-21/

It has steps for enabling 32 bit support, around step 2 enables and step 3 installs wine again after. You need to go through the wine install again after enabling 32 bit support (i386). If you don’t get all the packages with :i386 at the end remove wine and then install again.

With the upload, if it isn’t bittorrent it may be corrupted without being checked. Maybe look for an md5sum and confirm you have the file as expected. If the md5sum checks out you are sorted, if not you will at least know. That said it is as you say very unlikely to be the file, much more likely the libraries. Let me know how you go.

OK, so a few possible starting points. It looks like you are running a 32 bit programming but may not have all the 32 bit libraries installed. This may be referred to as multilib or similar, but you need the 32 bit versions to run 32 bit software properly.

Second, if the above doesn’t solve it you may be having the same issue I had with Arcanum. I had taken a rip many years back and it had been corrupted so it would segfault like yours is. The solution was to find an alternate image of the disk which was clean and using that.

Good luck

I think the mistake we make is thinking that people are better than they are. I probably have some hidden bigotry that I am unaware of right now but given a space to be exposed to it someone would notice and point it out. If you only know of someone from one thing they did you can form an opinion of them based on very limited information. Get to know them better and you find that hidden awful. Twitter is a tool of constant broad interaction and it preserves bad takes long enough to see them. Add a culture of never admiting to being wrong and filtering by who you agree with and you have a cycle of awful that turns perfectly boringly not great but OK people into monsters defending genocide. Maybe we shouldn’t know anything about the author, replace their name with a serial number or pseudonym and let the art stand on it’s own. Though the racist jewish, wait no goblin, bankers was fairly intense tbh.