Would this even work? Lol

  • jana@leminal.space
    link
    fedilink
    English
    arrow-up
    62
    ·
    1 year ago
    1. Use a metal straw to improve heat conduction.
    2. Increase the surface area and time for heat extraction to occur with extra loops in the water part (do they make metal silly straws?)
    3. Get really fancy and use a counterflow chiller: create a two layer straw, where tea goes through one layer while cold water goes through the other layer in the opposite direction (obviously with an outlet somewhere besides your teacup)
    • Ultraviolet@lemmy.world
      link
      fedilink
      English
      arrow-up
      21
      ·
      1 year ago

      But the goal here isn’t to maximize cooling, you still want the tea to be hot, just drinkably hot rather than dangerously.

    • Turun@feddit.de
      link
      fedilink
      arrow-up
      13
      ·
      edit-2
      1 year ago
      1. Use a metal straw to improve heat conduction.

      While metal is a better conductor of heat, when looking at the effective rate of cooling you need to take the wall thickness into account. I think a plastic straw with it’s micrometer thin walls is unbeatable.

      Edit: I have trouble finding information on wall thickness of drinking straws, it one source says they are 130-250 μm thick. That is thicker than I expected.

      • jana@leminal.space
        link
        fedilink
        English
        arrow-up
        9
        arrow-down
        1
        ·
        1 year ago

        Counterpoint: drink a cold drink through a plastic straw and a metal straw, with your fingers on the straw. See which one feels cooler.

        • Instigate@aussie.zone
          link
          fedilink
          arrow-up
          11
          ·
          1 year ago

          Leave a block of wood and a brick of steel in a freezer for 24 hours and see which one feels cooler - they’ll be the same actual temperature (at least negligibly close the longer they’re left) but the metal will feel immensely cooler to the touch due to its higher capacity for heat transference.

          • jana@leminal.space
            link
            fedilink
            English
            arrow-up
            3
            ·
            1 year ago

            Doesn’t that just agree with what I’m saying? The metal is going to transfer heat more easily than the plastic

        • Turun@feddit.de
          link
          fedilink
          arrow-up
          4
          ·
          1 year ago

          There are two compounding factors

          • heat capacity: any short term experiment will measure heat capacity first, conduction second

          • locality of contact: contact along the whole length of the straw eliminates heat conduction along the length of the straw. A single point of contact (holding the straw with fingers instead of the whole hand) behaves differently.

          I thought plastic straws were thinner than 0.2 mm, so maybe the metal is actually better.

          It’s fun arguing about these technicalities though!