Compared to bluetooth :

  • 60% lower power consumption
  • Six times higher data transmission speed
  • 1/30th the latency
  • 7 dB improvement anti-interference for a more stable connection
  • Twice the coverage distance, and
  • 10 times more network connections

Notice it’s not talking of compression yet, but raw connection performance.

Due to the US Huawei ban, the tech won’t arrive to the US yet. Nor maybe ever until something is done.

https://consumer.huawei.com/za/community/details/Huawei-Nearlink-launched-new-wireless-technology-far-ahead-of-Bluetooth/topicId_276306/

  • ∟⊔⊤∦∣≶@lemmy.nz
    link
    fedilink
    English
    arrow-up
    59
    ·
    1 year ago

    I’m skeptical about all the claims and 60% less power consumption. Usually to get greater range, you need to up the power consumption. I’m not a bluetooth/electromagnetic spectrum expert though, so maybe they figured something out with the modulation or something.

    • henfredemars@infosec.pub
      link
      fedilink
      English
      arrow-up
      30
      ·
      edit-2
      1 year ago

      Seems really light on details. I couldn’t find anything searching around and find these numbers hard to believe. I feel like it’ll be something like you can have 60% lower power OR this other claim but not all the claims at the same time.

      Smells like marketing.

    • bloubz@lemmygrad.ml
      link
      fedilink
      English
      arrow-up
      3
      ·
      edit-2
      1 year ago

      It depends on the bandwidth. And since it’s digital transfer, some things can be changed, we’re not talking directly about the analogic bandwidth/range ratio.

      I’ve not read the article but the exchange protocol can be to blame

    • ColeSloth@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      There’s already different classes of BT. The common class used for most that is the 30 feet, another that’s around 5 feet, and one that’s like 200 feet.

      But all of the claims seem farfetched. The range, power, and latency? Like they suddenly came up with all new tech that decimates BT that astoundingly? All while they’re trying to BS themselves around about the tech ban not harming them?

  • pastermil@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    39
    arrow-down
    4
    ·
    edit-2
    1 year ago

    So basically like a compromise between wifi & bluetooth?

    The thing is, people using bluetooth is not looking for raw performance. When they more performance, they’d go with wifi. Wifi data transfer is a thing.

    Last but not least, it’s Huawei…

    Edit: Regardless of the privacy & security stuff, Huawei is known for coming up with a bunch of empty gimmicks (see: Harmony OS).

    • cyd@lemmy.world
      link
      fedilink
      English
      arrow-up
      10
      ·
      1 year ago

      Bluetooth’s poor latency performance is quite a big problem. It makes Bluetooth audio peripherals finicky for watching videos, and unsuitable for gaming. Audio headsets for gaming use their own protocols, which annoyingly makes them incompatible with everything else.

      • afunkysongaday@lemmy.world
        link
        fedilink
        English
        arrow-up
        14
        ·
        1 year ago

        This is not an issue of Bluetooth itself. Some audio devices include too large caches (because in the early days not having interrupted audio was a bigger deal than having video and audio synchronized), but you get Bluetooth audio devices just using the default SBC codec that don’t have any noticeable delay. Using codecs like aptx adaptive fully solves the problem.

        The reason you don’t see BT gaming headsets is not latency, it’s Bluetooth missing a proper mode to submit audio in high quality bidirectionally. Long story short: when you got high quality sound on your headphones, the mic of your headset is not in use. When the mic is in use, the quality of the headphones is reduced to basically telephone call quality.

        There have been technologies trying to work around that, most important would probably be faststream, but it never really caught on. It’s pretty
        obscure still, you have to take care that all the devices and software you want to use support it, so I guess it’s just easier and cheaper to get a dedicated wireless gaming headset with dedicated USB dongle.

        At least since BT 5.0 I read stories that BT will be able to support gaming headsets aaaaany day now but well, nothing for now.

        • Tibert@compuverse.ukOP
          link
          fedilink
          English
          arrow-up
          3
          ·
          edit-2
          1 year ago

          The new creative zen hybrid pro hybrid and pro sxfi seem to be advertised to use bluetooth 5.3 with LC3 and LC3+.

          Tho not if they are on the market yet or if there are reviews.

    • Tibert@compuverse.ukOP
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      1
      ·
      1 year ago

      Not really like that.

      Right now it’s not possible to connect a headset/headphone via wifi to a device other than some proprietary things.

      So a general competitor usable on all devices allowing more data transfer for more audio with less compression. I think it could be interesting.

      Not just because it would maybe be better. But because competition on a market is a good thing for the consumer. And push bluetooth maybe further than what it is.

      Tho if by some misunderstanding, the chip used isn’t compatible with bluetooth I’m not very sure… As brands would need to include 2 chips, which increases the cost.

    • vividspecter@lemm.ee
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      Very low latency would be a big deal for audio. It currently ranges from incredibly high to passable, depending on implementation.

    • sndrtj@feddit.nl
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      1
      ·
      1 year ago

      I would certainly love Bluetooth to be higher bandwidth, for things like high-fidelity audio.

      Currently Bluetooth pairing usually works quite well on almost all devices. Conversely, wifi-based pairing is mostly a disaster. So much that even respected brands can’t get it right.

      • Obi@sopuli.xyz
        link
        fedilink
        English
        arrow-up
        6
        ·
        1 year ago

        I sometimes control a high end camera through my phone. For basic controls it connects via Bluetooth but if you want live-shooting (you see what’s being captured on the phone) it switches to WiFi. It’s ALWAYS a massive pain in the ass, takes forever to connect, disconnects if the phone screen is off even just a few seconds, etc etc.

    • PlexSheep@feddit.de
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Exactly. The important stuff is the stability of connection, even in a train where everyone uses it.

      • Tibert@compuverse.ukOP
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        1 year ago

        I’m not sure it’s always the only thing people want. Yes stability is needed, even more when a lot of people are using it.

        But currently headsets are heavily missing (very) high quality wireless audio and mic at the same time. Maybe this tech could push towards that.

  • MeanEYE@lemmy.world
    link
    fedilink
    English
    arrow-up
    34
    arrow-down
    1
    ·
    1 year ago

    So this is not too hard to achieve if you chose different frequency. But few things to consider.

    • 60% lower power consumption: doable since they don’t have backwards compatibility baggage, but still questionable figure;
    • six time transmission speed: achievable on higher frequency;
    • 1/30th of the latency: same on higher frequency;
    • 7dB improved: if no one is using the frequency yet, this is true;
    • twice the coverage: complete bullshit if you have six times transmission speed. In wireless communication speed almost always equals lower range because only one device can talk at a time;
    • 10 times more network connections: not with twice the coverage.

    But, there’s a huge number of issues and questions no one mentioned. Support at this point is literally zero, even if they push some devices with it, compatibility with your other devices is non-existent. Is the frequency approved across the world. There’s a reason why 2.4GHz was chosen for base WIFI and Bluetooth. It’s available everywhere. Is the standard open and how easily can one implement it. Software support, etc.

    • Tibert@compuverse.ukOP
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      3
      ·
      1 year ago

      Well look at wifi vs bluetooth. Wifi and bluetooth both use 2.4ghz. But wifi has a lot more bandwidth on 2.4ghz. Maybe because it uses more channels (a bigger frequency range)?

      But there is room to improve bandwidth, even over distance. Tho how would they have done that, no idea. There is need for more time so devices with the tech can arrive on the market, and be tested.

      But also more time so more specialised content can be produced to inform us normal people.

      • MeanEYE@lemmy.world
        link
        fedilink
        English
        arrow-up
        7
        ·
        1 year ago

        WIFI has channels indeed and each channel has a higher bandwidth. But even then WIFI is close to same range as Bluetooth, at least in theory. WIFI routers are usually on 100mW or 150mW emission power. Bluetooth can get to these, but they almost always focus on power consumption rather than bandwidth and range. Not to mention with WIFI you have an array of antennas to chose from, amplifiers, etc.

        Am almost always skeptical when new technology comes out. Look at ANT+ protocol, which was even popular at the time, but engineers switched to Bluetooth anyway. No matter how many issues you have with Bluetooth, its design is really easy to implement and program applications for.

        This new protocol would have to bring quite a bit of benefits to both users and engineers to become really popular and dethrone Bluetooth. And even then I doubt it would happen as easily.

        • Tibert@compuverse.ukOP
          link
          fedilink
          English
          arrow-up
          2
          arrow-down
          7
          ·
          1 year ago

          Well for it to get a chance in the US where the other side of big tech is, it would need to be sold to another company than Huawei, or for the US to relax the ban.

          I have no idea why the US banned Huawei so intensely other than blocking competition from China.

  • pjhenry1216@kbin.social
    link
    fedilink
    arrow-up
    27
    arrow-down
    1
    ·
    1 year ago

    I’m skeptical of any claims when they’re only touted by the one selling it. I’ll wait to see if it actually gets implemented anywhere and is verified by a third party.

  • rastilin@kbin.social
    link
    fedilink
    arrow-up
    13
    ·
    edit-2
    1 year ago

    I’ve never had a bluetooth device that worked well and connected reliably, so “better than bluetooth” is not hard.

    • pageflight@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Right. I care less about 60% less power, and more about will it randomly connect my phone to my car as my partner drives away instead to the speakers I was already using on the desk next to me.

  • Marius@lemmy.mariusdavid.fr
    link
    fedilink
    English
    arrow-up
    4
    ·
    edit-2
    1 year ago

    That seems pretty interesting mix of the performance of Wifi with the more multi-connection side of Bluetooth. I have yet to see what would support it (or even if there is a generic protocol for things like headset, game controller, screen, remote, media player, etc), but it seems to be the missing technology for wireless haptic feedback controller on PC.

    (edit: yes, joycon can do it, but it’s a special case where they does not pass raw audio)

  • ripcord@kbin.social
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    But is the connection speed good and riable?

    Shitty pairing or random reconnect slowness/issues have been my #1 complaint about Bluetooth for, oh, 15 years. It’s only barely gotten better in all that time.

    What I want is an experience like wired connections, where I just plug it in. Then it works. Immediately. Every time.

    Even as quick/reliable as wifi would be ok.

    I don’t give a shit about things like speed. Just reliability and decent audio quality.

  • OADINC@feddit.nl
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    As long as it doesn’t use the 2.4GHz band I’m fine with it. I’m so done with Audio stuttering while using WiFi.

      • Tibert@compuverse.ukOP
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        I am sory for not living in a giant home without any 2.4ghz neighbors around me.

        Also I myself use 2.4ghz for low bandwidth devices, and other connected devices which don’t have 5ghz. And there are also the neighbors who cast their 2.4ghz network they may use how they will around me.

        But I didn’t have many issues on most of the headsets I tried. At least higher end.

        There were still some outliers and with bad unreliable connections, even on high latency (jbl tour one m2 for example).

        Others like corsair headsets had issues at “high” range (like 10-15m through walls), but no issues at close range, but that is expected from their specs.

      • TimeSquirrel@kbin.social
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Most IoT devices still need it, and it’s actually recommended for those for its better wall/floor penetrating ability, since a light bulb isn’t going to need tons of bandwidth.

      • MeanEYE@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Pretty much all routers ISP give are 2.4 included so whether you want it or not you are surrounded by emissions at that frequency.

        • Vash63@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          1
          ·
          1 year ago

          Mine from the ISP does wifi 6 over 5GHz… I still disabled the wifi in favour of a Unifi multi-AP config.

          • MeanEYE@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            Even if you have skills and knowledge, people around you might not or simply don’t care. I’d hazard a guess 2.4GHz spectrum is filled.

  • marx2k@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    1 year ago

    This makes me somewhat hopeful for one day setting up a decent wireless surround sound in my living room.

    Haven’t checked in a while. Are there decent solutions today?