I’m building a NAS for the first time on my own, so I wanted to share the story so far here.

I’m not a stranger to custom builds, in fact I don’t think I ever bought an assembled PC (not counting second hand 386 box a million years ago). But this is my first small, low power build, so it’s not perfect, I already ran into a wall (more later).

I base the build on an AsRock mini-ITX board, the CPU is included, it’s passively cooled, low power consumption but still powerful for a NAS. I’m sticking it into a Node 304 Fractal Design case. Here’s the full list of parts I got:

  • AsRock J4125-ITX board with a Celeron 4125 (4-core CPU)
  • 8GB DDR4 RAM (a Crucial kit)
  • a 500GB NVMe SSD (which I can’t use)
  • a couple of Seagate IronWolf 4TB drives
  • 90W PicoPSU and some no-name power brick
  • Fractal Design Node 304 mini-ITX case.

I planned to have an SSD for OS, these two disks for my photography and media, and then later on expand with more storage (preferably SSD, when I can afford it).

As mentioned, I messed up: the M2 slot on the motherboard is a “Key E” slot. I never bothered with these keys before, so I didn’t know that a Key E slot does not have a SATA protocol, it won’t take my SSD.

Another thing, the PicoPSU is a 20-pin power supply, and the board has a 24-pin slot. It should still be fine, the specs say that this is still okay, but I’ll have to see. According to my back-of-the-napkin calculations, 90 Watts should be enough power for the mobo and CPU, the SSD and the two spinning disks.

Anyway I’ll get a regular SATA SSD tomorrow and see how it’s shaping up. Let me know if you want me to post more on my progress/end result or if you have any questions.

    • zlatko@programming.devOP
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Yes, it didn’t inspire confidence when it arrived so, but it’s actually a tiny PSU, it’s essentially all bolted onto the power connector :)

      • SteefLem@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        Yeah that makes more sense. But with power, better a bigger block than just enough power. I read somewhere that a powerunit works better if it has more left then just enough

        • zlatko@programming.devOP
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          Well, yes, kind of. More power means the PSU or the power adapter is heating up, generating more losses. Closer to their top power, it’s also a bit spikier. You have a bigger reserve for spikes.

          The downside is a slightly higher power draw (in absolute values, it’s negligible, but in comparison, it can be a double-digit percentage difference).

          I’ve been reading a bit, and I believe that my setup won’t exceed 50 Watts, maybe a bit more if I add two more spinning disks. It should be quite a good match, I think.